Learn More About how to check transmission fluid ;

What Is Meant By Transmission Fluid ?
Transmission Fluid is highly specialized oil designed for use in automatic transmissions. This fluid assists proper valve operation, reduces brake band friction, and lubricates the torque converter and gears.
What does transmission fluid do in an engine?
Transmission fluid serves three purposes: it lubricates the transmission, cools its parts while the car is operating, and transmits power from the engine to the transmission by providing fluid pressure.
How To Check Transmission Fluid
- Park vehicle on level surface, engage parking brake and start engine. Leave car in neutral or park. Let engine warm up and continue to run throughout operation unless vehicle’s owner’s manual says otherwise. (Be aware that some automatic transmission fluid levels are checked with the engine off. Check owner’s manual.)
- Locate automatic transmission fluid dipstick, typically near where the transmission or transaxle meets rear of the engine. It looks similar to the oil dipstick.
- Remove automatic transmission fluid dipstick. Wipe clean, reinsert fully and remove again. CAUTION: FLUID MAY BE HOT!
- Observe markings at end of dipstick. Your dipstick might have two markings for “full”—one warm, one cold. If the automatic transmission fluid level does not come up to the “warm” line, you’ll need to add automatic transmission fluid.
- Insert long funnel into automatic transmission fluid dipstick hole. Carefully add automatic transmission fluid in small increments and recheck level each time until fluid level reaches “warm” line. CAUTION: DO NOT OVERFILL OR SPILL AUTOMATIC TRANSMISSION FLUID ON HOT ENGINE PARTS!
- Reinsert automatic transmission fluid dipstick fully. You’re done!
Do you check the transmission fluid with the engine running?
Step 1: Leave the engine running and open the hood to your car. The car must be warm when you check transmission fluid.
Step 2: If you have an inline engine, look behind your oil dipstick, toward your windshield, to locate the transmission fluid dipstick.
Do you check transmission fluid when engine hot or cold?
If you’re going to be checking the transmission fluid level at home, it’s a good idea to warm up the car before you do so. If the car is checked while the engine is cold, it might give an inaccurate reading when you use the dipstick.
Do you check transmission fluid in park or neutral?
Turn on your car, leaving it in park, and let the engine run for a few minutes to warm up. Transmission fluid expands in heat and in order to receive accurate results, it must be under normal operating conditions. If the fluid is checked when the engine is cold, you may get false results indicating the fluid is low.
Signs of Low Transmission Fluid
- Noises
- Burning Smell
- Transmission Leaks
- Slipping Gears
- Slow Gear Engagement
- Vehicle Accelerates Poorly
- Check Engine or Transmission Warning Light Is On
Can transmission fluid get low without a leak?
We researched several professional sources to find out the cause. A vehicle will lose transmission fluid only when there’s a leak. Because there is no combustion with this fluid, it cannot burn off or evaporate while in an air-tight space. If you are running low on this fluid, it is because of a leak.
Disclaimer ; Dashboard Logins is to guide you only on how to Login to the portal in question , But not the exact login page. Thank You…